<-
Apache > HTTP Server > Documentation > Version 2.4 > Modules

Apache Module mod_cache

Available Languages:  en  |  fr  |  ja  |  ko 

Description:RFC 2616 compliant HTTP caching filter.
Status:Extension
Module Identifier:cache_module
Source File:mod_cache.c

Summary

This module should be used with care, as when the CacheQuickHandler directive is in its default value of on, the Allow and Deny directives will be circumvented. You should not enable quick handler caching for any content to which you wish to limit access by client host name, address or environment variable.

mod_cache implements an RFC 2616 compliant HTTP content caching filter, with support for the caching of content negotiated responses containing the Vary header.

RFC 2616 compliant caching provides a mechanism to verify whether stale or expired content is still fresh, and can represent a significant performance boost when the origin server supports conditional requests by honouring the If-None-Match HTTP request header. Content is only regenerated from scratch when the content has changed, and not when the cached entry expires.

As a filter, mod_cache can be placed in front of content originating from any handler, including flat files (served from a slow disk cached on a fast disk), the output of a CGI script or dynamic content generator, or content proxied from another server.

In the default configuration, mod_cache inserts the caching filter as far forward as possible within the filter stack, utilising the quick handler to bypass all per request processing when returning content to the client. In this mode of operation, mod_cache may be thought of as a caching proxy server bolted to the front of the webserver, while running within the webserver itself.

When the quick handler is switched off using the CacheQuickHandler directive, it becomes possible to insert the CACHE filter at a point in the filter stack chosen by the administrator. This provides the opportunity to cache content before that content is personalised by the mod_include filter, or optionally compressed by the mod_deflate filter.

Under normal operation, mod_cache will respond to and can be controlled by the Cache-Control and Pragma headers sent from a client in a request, or from a server within a response. Under exceptional circumstances, mod_cache can be configured to override these headers and force site specific behaviour, however such behaviour will be limited to this cache only, and will not affect the operation of other caches that may exist between the client and server, and as a result is not recommended unless strictly necessary.

RFC 2616 allows for the cache to return stale data while the existing stale entry is refreshed from the origin server, and this is supported by mod_cache when the CacheLock directive is suitably configured. Such responses will contain a Warning HTTP header with a 110 response code. RFC 2616 also allows a cache to return stale data when the attempt made to refresh the stale data returns an error 500 or above, and this behaviour is supported by default by mod_cache. Such responses will contain a Warning HTTP header with a 111 response code.

mod_cache requires the services of one or more storage management modules. One storage management module is included in the base Apache distribution:

mod_cache_disk
Implements a disk based storage manager. Headers and bodies are stored separately on disk, in a directory structure derived from the md5 hash of the cached URL. Multiple content negotiated responses can be stored concurrently, however the caching of partial content is not supported by this module. The htcacheclean tool is provided to list cached URLs, remove cached URLs, or to maintain the size of the disk cache within size and inode limits.
mod_cache_socache
Implements a shared object cache based storage manager. Headers and bodies are stored together beneath a single key based on the URL of the response being cached. Multiple content negotiated responses can be stored concurrently, however the caching of partial content is not supported by this module.

Further details, discussion, and examples, are provided in the Caching Guide.

Directives

Topics

See also

top

Related Modules and Directives

top

Sample Configuration

Sample apache2.conf

#
# Sample Cache Configuration
#
LoadModule cache_module modules/mod_cache.so
<IfModule mod_cache.c>
    LoadModule cache_disk_module modules/mod_cache_disk.so
    <IfModule mod_cache_disk.c>
        CacheRoot c:/cacheroot
        CacheEnable disk  /
        CacheDirLevels 5
        CacheDirLength 3
    </IfModule>

    # When acting as a proxy, don't cache the list of security updates
    CacheDisable http://security.update.server/update-list/
</IfModule>
top

Avoiding the Thundering Herd

When a cached entry becomes stale, mod_cache will submit a conditional request to the backend, which is expected to confirm whether the cached entry is still fresh, and send an updated entity if not.

A small but finite amount of time exists between the time the cached entity becomes stale, and the time the stale entity is fully refreshed. On a busy server, a significant number of requests might arrive during this time, and cause a thundering herd of requests to strike the backend suddenly and unpredictably.

To keep the thundering herd at bay, the CacheLock directive can be used to define a directory in which locks are created for URLs in flight. The lock is used as a hint by other requests to either suppress an attempt to cache (someone else has gone to fetch the entity), or to indicate that a stale entry is being refreshed (stale content will be returned in the mean time).

Initial caching of an entry

When an entity is cached for the first time, a lock will be created for the entity until the response has been fully cached. During the lifetime of the lock, the cache will suppress the second and subsequent attempt to cache the same entity. While this doesn't hold back the thundering herd, it does stop the cache attempting to cache the same entity multiple times simultaneously.

Refreshment of a stale entry

When an entity reaches its freshness lifetime and becomes stale, a lock will be created for the entity until the response has either been confirmed as still fresh, or replaced by the backend. During the lifetime of the lock, the second and subsequent incoming request will cause stale data to be returned, and the thundering herd is kept at bay.

Locks and Cache-Control: no-cache

Locks are used as a hint only to enable the cache to be more gentle on backend servers, however the lock can be overridden if necessary. If the client sends a request with a Cache-Control header forcing a reload, any lock that may be present will be ignored, and the client's request will be honored immediately and the cached entry refreshed.

As a further safety mechanism, locks have a configurable maximum age. Once this age has been reached, the lock is removed, and a new request is given the opportunity to create a new lock. This maximum age can be set using the CacheLockMaxAge directive, and defaults to 5 seconds.

Example configuration

Enabling the cache lock

#
# Enable the cache lock
#
<IfModule mod_cache.c>
    CacheLock on
    CacheLockPath /tmp/mod_cache-lock
    CacheLockMaxAge 5
</IfModule>
top

Fine Control with the CACHE Filter

Under the default mode of cache operation, the cache runs as a quick handler, short circuiting the majority of server processing and offering the highest cache performance available.

In this mode, the cache bolts onto the front of the server, acting as if a free standing RFC 2616 caching proxy had been placed in front of the server.

While this mode offers the best performance, the administrator may find that under certain circumstances they may want to perform further processing on the request after the request is cached, such as to inject personalisation into the cached page, or to apply authorisation restrictions to the content. Under these circumstances, an administrator is often forced to place independent reverse proxy servers either behind or in front of the caching server to achieve this.

To solve this problem the CacheQuickHandler directive can be set to off, and the server will process all phases normally handled by a non-cached request, including the authentication and authorisation phases.

In addition, the administrator may optionally specify the precise point within the filter chain where caching is to take place by adding the CACHE filter to the output filter chain.

For example, to cache content before applying compression to the response, place the CACHE filter before the DEFLATE filter as in the example below:

# Cache content before optional compression
CacheQuickHandler off
AddOutputFilterByType CACHE;DEFLATE text/plain

Another option is to have content cached before personalisation is applied by mod_include (or another content processing filter). In this example templates containing tags understood by mod_include are cached before being parsed:

# Cache content before mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType CACHE;INCLUDES;DEFLATE text/html

You may place the CACHE filter anywhere you wish within the filter chain. In this example, content is cached after being parsed by mod_include, but before being processed by mod_deflate:

# Cache content between mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType INCLUDES;CACHE;DEFLATE text/html

Warning:

If the location of the CACHE filter in the filter chain is changed for any reason, you may need to flush your cache to ensure that your data served remains consistent. mod_cache is not in a position to enforce this for you.
top

Cache Status and Logging

Once mod_cache has made a decision as to whether or not an entity is to be served from cache, the detailed reason for the decision is written to the subprocess environment within the request under the cache-status key. This reason can be logged by the LogFormat directive as follows:

LogFormat "%{cache-status}e ..."

Based on the caching decision made, the reason is also written to the subprocess environment under one the following four keys, as appropriate:

cache-hit
The response was served from cache.
cache-revalidate
The response was stale and was successfully revalidated, then served from cache.
cache-miss
The response was served from the upstream server.
cache-invalidate
The cached entity was invalidated by a request method other than GET or HEAD.

This makes it possible to support conditional logging of cached requests as per the following example:

CustomLog cached-requests.log common env=cache-hit
CustomLog uncached-requests.log common env=cache-miss
CustomLog revalidated-requests.log common env=cache-revalidate
CustomLog invalidated-requests.log common env=cache-invalidate

For module authors, a hook called cache_status is available, allowing modules to respond to the caching outcomes above in customised ways.

top

CacheDefaultExpire Directive

Description:The default duration to cache a document when no expiry date is specified.
Syntax:CacheDefaultExpire seconds
Default:CacheDefaultExpire 3600 (one hour)
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

The CacheDefaultExpire directive specifies a default time, in seconds, to cache a document if neither an expiry date nor last-modified date are provided with the document. The value specified with the CacheMaxExpire directive does not override this setting.

CacheDefaultExpire 86400
top

CacheDetailHeader Directive

Description:Add an X-Cache-Detail header to the response.
Syntax:CacheDetailHeader on|off
Default:CacheDetailHeader off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache
Compatibility:Available in Apache 2.3.9 and later

When the CacheDetailHeader directive is switched on, an X-Cache-Detail header will be added to the response containing the detailed reason for a particular caching decision.

It can be useful during development of cached RESTful services to have additional information about the caching decision written to the response headers, so as to confirm whether Cache-Control and other headers have been correctly used by the service and client.

If the normal handler is used, this directive may appear within a <Directory> or <Location> directive. If the quick handler is used, this directive must appear within a server or virtual host context, otherwise the setting will be ignored.

# Enable the X-Cache-Detail header
CacheDetailHeader on

X-Cache-Detail: "conditional cache hit: entity refreshed" from localhost

top

CacheDisable Directive

Description:Disable caching of specified URLs
Syntax:CacheDisable url-string | on
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

The CacheDisable directive instructs mod_cache to not cache urls at or below url-string.

Example

CacheDisable /local_files

If used in a <Location> directive, the path needs to be specified below the Location, or if the word "on" is used, caching for the whole location will be disabled.

Example

<Location /foo>
    CacheDisable on
</Location>

The no-cache environment variable can be set to disable caching on a finer grained set of resources in versions 2.2.12 and later.

See also

top

CacheEnable Directive

Description:Enable caching of specified URLs using a specified storage manager
Syntax:CacheEnable cache_type [url-string]
Context:server config, virtual host, directory
Status:Extension
Module:mod_cache
Compatibility:A url-string of '/' applied to forward proxy content in 2.2 and earlier.

The CacheEnable directive instructs mod_cache to cache urls at or below url-string. The cache storage manager is specified with the cache_type argument. The CacheEnable directive can alternatively be placed inside either <Location> or <LocationMatch> sections to indicate the content is cacheable. cache_type disk instructs mod_cache to use the disk based storage manager implemented by mod_cache_disk. cache_type socache instructs mod_cache to use the shared object cache based storage manager implemented by mod_cache_socache.

In the event that the URL space overlaps between different CacheEnable directives (as in the example below), each possible storage manager will be run until the first one that actually processes the request. The order in which the storage managers are run is determined by the order of the CacheEnable directives in the configuration file. CacheEnable directives within <Location> or <LocationMatch> sections are processed before globally defined CacheEnable directives.

When acting as a forward proxy server, url-string must minimally begin with a protocol for which caching should be enabled.

# Cache content (normal handler only)
CacheQuickHandler off
<Location /foo>
    CacheEnable disk
</Location>

# Cache regex (normal handler only)
CacheQuickHandler off
<LocationMatch foo$>
    CacheEnable disk
</LocationMatch>

# Cache all but forward proxy url's (normal or quick handler)
CacheEnable  disk  /

# Cache FTP-proxied url's (normal or quick handler)
CacheEnable  disk  ftp://

# Cache forward proxy content from www.example.org (normal or quick handler)
CacheEnable  disk  http://www.example.org/

A hostname starting with a "*" matches all hostnames with that suffix. A hostname starting with "." matches all hostnames containing the domain components that follow.

# Match www.example.org, and fooexample.org
CacheEnable  disk  http://*example.org/
# Match www.example.org, but not fooexample.org
CacheEnable  disk  http://.example.org/

The no-cache environment variable can be set to disable caching on a finer grained set of resources in versions 2.2.12 and later.

See also

top

CacheHeader Directive

Description:Add an X-Cache header to the response.
Syntax:CacheHeader on|off
Default:CacheHeader off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache
Compatibility:Available in Apache 2.3.9 and later

When the CacheHeader directive is switched on, an X-Cache header will be added to the response with the cache status of this response. If the normal handler is used, this directive may appear within a <Directory> or <Location> directive. If the quick handler is used, this directive must appear within a server or virtual host context, otherwise the setting will be ignored.

HIT
The entity was fresh, and was served from cache.
REVALIDATE
The entity was stale, was successfully revalidated and was served from cache.
MISS
The entity was fetched from the upstream server and was not served from cache.
# Enable the X-Cache header
CacheHeader on
X-Cache: HIT from localhost
top

CacheIgnoreCacheControl Directive

Description:Ignore request to not serve cached content to client
Syntax:CacheIgnoreCacheControl On|Off
Default:CacheIgnoreCacheControl Off
Context:server config, virtual host
Status:Extension
Module:mod_cache

Ordinarily, requests containing a Cache-Control: no-cache or Pragma: no-cache header value will not be served from the cache. The CacheIgnoreCacheControl directive allows this behavior to be overridden. CacheIgnoreCacheControl On tells the server to attempt to serve the resource from the cache even if the request contains no-cache header values. Resources requiring authorization will never be cached.

CacheIgnoreCacheControl On

Warning:

This directive will allow serving from the cache even if the client has requested that the document not be served from the cache. This might result in stale content being served.

See also

top

CacheIgnoreHeaders Directive

Description:Do not store the given HTTP header(s) in the cache.
Syntax:CacheIgnoreHeaders header-string [header-string] ...
Default:CacheIgnoreHeaders None
Context:server config, virtual host
Status:Extension
Module:mod_cache

According to RFC 2616, hop-by-hop HTTP headers are not stored in the cache. The following HTTP headers are hop-by-hop headers and thus do not get stored in the cache in any case regardless of the setting of CacheIgnoreHeaders:

CacheIgnoreHeaders specifies additional HTTP headers that should not to be stored in the cache. For example, it makes sense in some cases to prevent cookies from being stored in the cache.

CacheIgnoreHeaders takes a space separated list of HTTP headers that should not be stored in the cache. If only hop-by-hop headers not should be stored in the cache (the RFC 2616 compliant behaviour), CacheIgnoreHeaders can be set to None.

Example 1

CacheIgnoreHeaders Set-Cookie

Example 2

CacheIgnoreHeaders None

Warning:

If headers like Expires which are needed for proper cache management are not stored due to a CacheIgnoreHeaders setting, the behaviour of mod_cache is undefined.
top

CacheIgnoreNoLastMod Directive

Description:Ignore the fact that a response has no Last Modified header.
Syntax:CacheIgnoreNoLastMod On|Off
Default:CacheIgnoreNoLastMod Off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

Ordinarily, documents without a last-modified date are not cached. Under some circumstances the last-modified date is removed (during mod_include processing for example) or not provided at all. The CacheIgnoreNoLastMod directive provides a way to specify that documents without last-modified dates should be considered for caching, even without a last-modified date. If neither a last-modified date nor an expiry date are provided with the document then the value specified by the CacheDefaultExpire directive will be used to generate an expiration date.

CacheIgnoreNoLastMod On
top

CacheIgnoreQueryString Directive

Description:Ignore query string when caching
Syntax:CacheIgnoreQueryString On|Off
Default:CacheIgnoreQueryString Off
Context:server config, virtual host
Status:Extension
Module:mod_cache

Ordinarily, requests with query string parameters are cached separately for each unique query string. This is according to RFC 2616/13.9 done only if an expiration time is specified. The CacheIgnoreQueryString directive tells the cache to cache requests even if no expiration time is specified, and to reply with a cached reply even if the query string differs. From a caching point of view the request is treated as if having no query string when this directive is enabled.

CacheIgnoreQueryString On
top

CacheIgnoreURLSessionIdentifiers Directive

Description:Ignore defined session identifiers encoded in the URL when caching
Syntax:CacheIgnoreURLSessionIdentifiers identifier [identifier] ...
Default:CacheIgnoreURLSessionIdentifiers None
Context:server config, virtual host
Status:Extension
Module:mod_cache

Sometimes applications encode the session identifier into the URL like in the following Examples:

This causes cachable resources to be stored separately for each session, which is often not desired. CacheIgnoreURLSessionIdentifiers lets define a list of identifiers that are removed from the key that is used to identify an entity in the cache, such that cachable resources are not stored separately for each session.

CacheIgnoreURLSessionIdentifiers None clears the list of ignored identifiers. Otherwise, each identifier is added to the list.

Example 1

CacheIgnoreURLSessionIdentifiers jsessionid

Example 2

CacheIgnoreURLSessionIdentifiers None
top

CacheKeyBaseURL Directive

Description:Override the base URL of reverse proxied cache keys.
Syntax:CacheKeyBaseURL URL
Default:CacheKeyBaseURL http://example.com
Context:server config, virtual host
Status:Extension
Module:mod_cache
Compatibility:Available in Apache 2.3.9 and later

When the CacheKeyBaseURL directive is specified, the URL provided will be used as the base URL to calculate the URL of the cache keys in the reverse proxy configuration. When not specified, the scheme, hostname and port of the current virtual host is used to construct the cache key. When a cluster of machines is present, and all cached entries should be cached beneath the same cache key, a new base URL can be specified with this directive.

# Override the base URL of the cache key.
CacheKeyBaseURL http://www.example.com/
Take care when setting this directive. If two separate virtual hosts are accidentally given the same base URL, entries from one virtual host will be served to the other.
top

CacheLastModifiedFactor Directive

Description:The factor used to compute an expiry date based on the LastModified date.
Syntax:CacheLastModifiedFactor float
Default:CacheLastModifiedFactor 0.1
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

In the event that a document does not provide an expiry date but does provide a last-modified date, an expiry date can be calculated based on the time since the document was last modified. The CacheLastModifiedFactor directive specifies a factor to be used in the generation of this expiry date according to the following formula: expiry-period = time-since-last-modified-date * factor expiry-date = current-date + expiry-period For example, if the document was last modified 10 hours ago, and factor is 0.1 then the expiry-period will be set to 10*0.1 = 1 hour. If the current time was 3:00pm then the computed expiry-date would be 3:00pm + 1hour = 4:00pm. If the expiry-period would be longer than that set by CacheMaxExpire, then the latter takes precedence.

CacheLastModifiedFactor 0.5
top

CacheLock Directive

Description:Enable the thundering herd lock.
Syntax:CacheLock on|off
Default:CacheLock off
Context:server config, virtual host
Status:Extension
Module:mod_cache
Compatibility:Available in Apache 2.2.15 and later

The CacheLock directive enables the thundering herd lock for the given URL space.

In a minimal configuration the following directive is all that is needed to enable the thundering herd lock in the default system temp directory.

# Enable cache lock
CacheLock on
top

CacheLockMaxAge Directive

Description:Set the maximum possible age of a cache lock.
Syntax:CacheLockMaxAge integer
Default:CacheLockMaxAge 5
Context:server config, virtual host
Status:Extension
Module:mod_cache

The CacheLockMaxAge directive specifies the maximum age of any cache lock.

A lock older than this value in seconds will be ignored, and the next incoming request will be given the opportunity to re-establish the lock. This mechanism prevents a slow client taking an excessively long time to refresh an entity.

top

CacheLockPath Directive

Description:Set the lock path directory.
Syntax:CacheLockPath directory
Default:CacheLockPath /tmp/mod_cache-lock
Context:server config, virtual host
Status:Extension
Module:mod_cache

The CacheLockPath directive allows you to specify the directory in which the locks are created. By default, the system's temporary folder is used. Locks consist of empty files that only exist for stale URLs in flight, so is significantly less resource intensive than the traditional disk cache.

top

CacheMaxExpire Directive

Description:The maximum time in seconds to cache a document
Syntax:CacheMaxExpire seconds
Default:CacheMaxExpire 86400 (one day)
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

The CacheMaxExpire directive specifies the maximum number of seconds for which cachable HTTP documents will be retained without checking the origin server. Thus, documents will be out of date at most this number of seconds. This maximum value is enforced even if an expiry date was supplied with the document.

CacheMaxExpire 604800
top

CacheMinExpire Directive

Description:The minimum time in seconds to cache a document
Syntax:CacheMinExpire seconds
Default:CacheMinExpire 0
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

The CacheMinExpire directive specifies the minimum number of seconds for which cachable HTTP documents will be retained without checking the origin server. This is only used if no valid expire time was supplied with the document.

CacheMinExpire 3600
top

CacheQuickHandler Directive

Description:Run the cache from the quick handler.
Syntax:CacheQuickHandler on|off
Default:CacheQuickHandler on
Context:server config, virtual host
Status:Extension
Module:mod_cache
Compatibility:Apache HTTP Server 2.3.3 and later

The CacheQuickHandler directive controls the phase in which the cache is handled.

In the default enabled configuration, the cache operates within the quick handler phase. This phase short circuits the majority of server processing, and represents the most performant mode of operation for a typical server. The cache bolts onto the front of the server, and the majority of server processing is avoided.

When disabled, the cache operates as a normal handler, and is subject to the full set of phases when handling a server request. While this mode is slower than the default, it allows the cache to be used in cases where full processing is required, such as when content is subject to authorisation.

# Run cache as a normal handler
CacheQuickHandler off

It is also possible, when the quick handler is disabled, for the administrator to choose the precise location within the filter chain where caching is to be performed, by adding the CACHE filter to the chain.

# Cache content before mod_include and mod_deflate
CacheQuickHandler off
AddOutputFilterByType CACHE;INCLUDES;DEFLATE text/html

If the CACHE filter is specified more than once, the last instance will apply.

top

CacheStaleOnError Directive

Description:Serve stale content in place of 5xx responses.
Syntax:CacheStaleOnError on|off
Default:CacheStaleOnError on
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache
Compatibility:Available in Apache 2.3.9 and later

When the CacheStaleOnError directive is switched on, and when stale data is available in the cache, the cache will respond to 5xx responses from the backend by returning the stale data instead of the 5xx response. While the Cache-Control headers sent by clients will be respected, and the raw 5xx responses returned to the client on request, the 5xx response so returned to the client will not invalidate the content in the cache.

# Serve stale data on error.
CacheStaleOnError on
top

CacheStoreExpired Directive

Description:Attempt to cache responses that the server reports as expired
Syntax:CacheStoreExpired On|Off
Default:CacheStoreExpired Off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

Since httpd 2.2.4, responses which have already expired are not stored in the cache. The CacheStoreExpired directive allows this behavior to be overridden. CacheStoreExpired On tells the server to attempt to cache the resource if it is stale. Subsequent requests would trigger an If-Modified-Since request of the origin server, and the response may be fulfilled from cache if the backend resource has not changed.

CacheStoreExpired On
top

CacheStoreNoStore Directive

Description:Attempt to cache requests or responses that have been marked as no-store.
Syntax:CacheStoreNoStore On|Off
Default:CacheStoreNoStore Off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

Ordinarily, requests or responses with Cache-Control: no-store header values will not be stored in the cache. The CacheStoreNoStore directive allows this behavior to be overridden. CacheStoreNoStore On tells the server to attempt to cache the resource even if it contains no-store header values. Resources requiring authorization will never be cached.

CacheStoreNoStore On

Warning:

As described in RFC 2616, the no-store directive is intended to "prevent the inadvertent release or retention of sensitive information (for example, on backup tapes)." Enabling this option could store sensitive information in the cache. You are hereby warned.

See also

top

CacheStorePrivate Directive

Description:Attempt to cache responses that the server has marked as private
Syntax:CacheStorePrivate On|Off
Default:CacheStorePrivate Off
Context:server config, virtual host, directory, .htaccess
Status:Extension
Module:mod_cache

Ordinarily, responses with Cache-Control: private header values will not be stored in the cache. The CacheStorePrivate directive allows this behavior to be overridden. CacheStorePrivate On tells the server to attempt to cache the resource even if it contains private header values. Resources requiring authorization will never be cached.

CacheStorePrivate On

Warning:

This directive will allow caching even if the upstream server has requested that the resource not be cached. This directive is only ideal for a 'private' cache.

See also

Available Languages:  en  |  fr  |  ja  |  ko 

top

Comments

Notice:
This is not a Q&A section. Comments placed here should be pointed towards suggestions on improving the documentation or server, and may be removed again by our moderators if they are either implemented or considered invalid/off-topic. Questions on how to manage the Apache HTTP Server should be directed at either our IRC channel, #httpd, on Freenode, or sent to our mailing lists.